Overview
This type of paving is made from a mixture of shingle, quartz or crushed granite. The elements are pushed through a mix process to ensure that each grain is coated with a clear UV stable polymer resin.
Water Penetrable
However, resin bound surfaces allow water to drain through, acting as a sieve and allowing the water to flow naturally into the water table.
Overview
This type of paving is made from a mixture of shingle, quartz or crushed granite.
Water Penetrable
However, resin bound surfaces allow water to drain through, acting as a sieve and allowing the water to flow naturally into the water table.
The Finish
The elements are pushed through a mix process to ensure that each grain is coated with a clear UV stable polymer resin.
A permeable resin bound driveway enables water to drain away to the water table, not allowing surface run-off and ensuring the sustainability to the surrounding planted areas.
Installation times are greatly reduced when compared with block paving and other driveway installations.
Resin Bound surfaces can be applied in various shapes, large or small areas.
The aggregate is available in a wide variety of shapes and colours.
Driveway Before
Driveway After the Resin Bound Surface has been applied
The resin bound surface has been laid incorporating the manhole cover in with the main driveway and pathway colour
Preparation for installing a Resin Bound Driveway
The driveway was originally tarmac
After cleaning the driveway
The resin is mixed with the aggregate and poured on to the surface of the drive
The resin mix is then trowelled so the surface is flat and smooth
Extended driveway to side of the property
Finished Driveway and side pathway
Resin Bound can be laid on most surfaces and the product has been used in many and varied areas, such as:
- Driveways
- Paths
- Patios
- Car Parks
- Pedestrian Areas
- Cycle Lanes
- Bus Lanes
- Swimming Pool surrounds
- Flooring
Different colour aggregates are available and mixed with the resin, patterns can be created within the main structure